Basement windows
Basement Window Replacement in Emporia Homes
We do basement window replacement for Emporia houses whose lower-level windows have rusted, rotted, fogged or simply stopped closing. The old units come out of the foundation, new vinyl windows go in, and each one is sealed to the concrete or block so the basement stays drier and holds its heat.
Basement Window Replacement for Concrete and Block Foundations
Basement windows sit lower and take more weather than anything upstairs. Snow piles against them, rain runs down into the well, and the frame stays damp for days. That is why so many original basement windows in older Emporia homes are rusted steel or wood that has gone soft at the bottom.
On a poured concrete wall, the new window is set into the existing opening, shimmed, fastened and foamed, then sealed to the concrete outside. On a block foundation we check the blocks around the opening for cracks or loose mortar first. If the old frame is too far gone to hold a new unit, it comes out and the opening is fitted with new material before the window goes in.
Inside, the window gets trimmed to match the room. In an unfinished basement that can be as simple as a sealed, clean edge; in a finished one it's casing to match the rest of the trim.
Hoppers, Sliders and Fixed Units
A basement window usually goes by one of three names, depending on how it opens.
Hopper: tips in from the top
Hinged along the bottom and tipping in from the top. It opens the full width of a short, wide opening, and rain falls against the outside of the glass instead of into the room.
Slider: glides sideways
One sash slides past the other. Easy to reach and easy to open from a step stool, which makes it the common pick for laundry rooms and finished rooms.
A fixed unit doesn't open at all. It's the least expensive option and lets in the most light for its size, so it suits storage areas and openings you never vent.
Signs a Basement Window Has Had Enough
- Rust flaking off a steel frame, or rust stains running down the wall below it.
- Wood that a screwdriver sinks into at the sill or the bottom corners.
- Water stains, efflorescence or a damp line on the wall under the window after rain.
- Glass that's cracked, fogged or held in with tape or caulk.
- A sash that won't latch, so the window sits slightly open all winter.
- A draft you can feel across the room on a cold day.
Any one of these is reason enough to swap the window. Two or three together usually mean the frame and the seal around it are both letting water and cold air through.
Window Wells and Water
A new basement window is only as dry as the well in front of it. The bottom of the well should sit a few inches below the window sill, with gravel that lets water soak away rather than pool. The ground around the well should slope away from the house. When the well has filled with soil, rusted through or pulled away from the foundation, water collects against the glass every time it rains.
We look at the well on the measuring visit and note anything that needs work. Cleaning out the well and resetting the gravel is often all it takes. If the liner itself has failed, it's best replaced before or alongside the new window, so the opening is dealt with all at once.
What Changes the Price of a Basement Window
- The old frame: wood or steel that comes out cleanly is quick; steel rusted into the concrete takes cutting and grinding.
- Repairs to the opening: rotted wood bucks or crumbling block around the window add material and time.
- Style and size: fixed units cost the least, sliders and hoppers more.
- Glass: double-pane low-E as standard; obscure glass for bathrooms and laundry rooms if you want privacy.
- Finishing inside: a finished basement needs casing to match the room.
- The well: cleanout, new gravel or a new liner if the old one has failed.
Every item shows up on the written estimate so you can see what each opening costs. If you're replacing upstairs windows too, see window replacement for how a full-house job runs.
Questions About Emporia Basement Windows
Q1What does a basement window replacement cost?
Less than most upstairs windows in many cases, since basement units are small, but the opening sets the price more than the window does. A vinyl slider dropped into a sound wood or steel frame is the simple end. A rusted steel frame that has to be cut out of the concrete, a rotted wood buck, or a well that needs regrading all add labor. We price each basement opening on its own line after we've looked at it.
Q2How hard is it to replace a basement window?
Getting the old one out is the hard part. Steel basement frames are often set right into the concrete and rusted in place, and old wood frames may have rotted where they meet the foundation. Once the opening is clean and square, the new window goes in much like any other: set, shimmed, fastened, foamed and sealed to the masonry so water can't follow the frame inside.
Q3Which window type works best in a basement?
Vinyl, because it can't rust or rot in the damp spot a basement window lives in. For the style, a hopper (hinged at the bottom, tipping in from the top) or a slider gives you air, and a fixed unit gives the most glass for the least money where you never open it. Low-E double-pane glass keeps a finished basement more comfortable than the single panes most old basement windows have.
Q4What happens to the window well during the swap?
We clear leaves and debris out of the well so the crew can work and so the new sill isn't sitting in muck. If the well is cracked, pulling away from the house or filled to the sill with dirt, we point it out before the install. A well that sits too low or drains poorly will put water against even a new window, so it's worth fixing at the same time.
Swapping a sliding door at the same time? See patio door replacement.